Home |  Products  |  Service  ISL Browse  |  Contact  Career
 


Underwater Acoustic
..: Acoustic signal acquisition,
     recording and projection

   
  Hydrophone/Transducers
   
  Acoustic signal conditioning
   
  Data recorder
   
      Time code products
   
      Analyze software
         
Power amplifiers
          Low frequency high power
          projectors

  
        Acoustic modem
   
      Cable
..: Sensor network products

Power Amplifiers

Smaller switch mode amplifiers
    The Gearing & Watson range of digital switching amplifiers comprises two models, the DSA1 and DSA4. These amplifiers provide very high levels of efficiency (better than 90%) with superior levels of performance. These amplifiers occupy little space and are suitable for driving shakers from all manufacturers, as well as other laboratory

 
applications.

EMC has been a major factor in the design of the digital switching amplifiers. Full use has been made of Faraday cages, compartmentalisation, filtered interconnections, segmented wiring, common mode chokes for symmetrical currents, mains filters, optical coupling of signals and screened cables. The DSA series features low distortion, typically less than 0.3%thd, a wide bandwidth of 3Hz to 5kHz and a signal to noise ratio of better than -70dB. The DSA4 is supplied as a fully enclosed 19 inch instrumentation rack system. Each power amplifier system comprises a Control Unit, a number of 4kVA power modules, a power supply, a shaker de field supply and a shaker degaussing coil supply.
A Control Unit performs the housekeeping functions, providing user controls and displays to enable switch-on status reporting, management of a heavy duty power supply and the control of up to six power modules.
The DSA1 is a 19 inch rack mounting or bench top unit which is based on the larger model DSA4.
The DSA1-1k is a full bridge switching amplifier which includes full shaker protection facilities, configured to provide outputs rated at 1kVA or 2kVA as the DSA1-2k . The DSA1 series includes all the benefits associated with larger systems by incorporating the power amplifier, the dc field supply and an (optional) degaussing supply all in a compact unit measuring only 266mm high.
 

Linear Amplifiers

For small shaker systems, and other laboratory applications, Gearing & Watson produce a range of linear power amplifiers in 3 models: PA30E,  PA100E, PA300E.
These high quality amplifiers include many special features, such as
·         operation in constant current or constant voltage mode,
·         an integral bounce free variable frequency oscillator,
·         bench top configurations.

 
Tel:8610-88571028/29/30 Fax:8610-88571026
E-mail: info@islchina.com