Analog-to-ATM Card

    Selectable 1 to 32 channels of operation. Each channel is transported on an ATM virtual channel.
    Complete differential path from sensor inputs to A/Ds with selectable gain.
    Sample rates up to 600 Ksamples/sec per channel at 16-bits resolution.
    On-board D/A test port with channel select switch.
    Timing port for synchronization; Internal, external, or network-based A/D timing modes.
    Diagnostic signal generator for performance tests and fault location.
    A/D Data, controls, status, echos, and configuration via the ATM network.
    Zero-Programming” requires no VME OS, VME processor, drivers, or code.
    General purpose RS-232/RS-485 serial port with network access.

    Selectable 1 to 64 channels of operation. Each channel is transported on an ATM virtual channel.
    Complete differential path from sensor inputs to A/Ds with selectable gain.
    Sample rates up to 100 Ksamples/sec per channel at 24-bits resolution.
    On-board D/A test port with channel select switch.
    Timing port for synchronization; Internal, external, or network-based A/D timing modes.
    Diagnostic signal generator for performance tests and fault location.
    A/D Data, controls, status, echos, and configuration via the ATM network.
    Zero-Programming” requires no VME OS, VME processor, drivers, or code.
    General purpose RS-232/RS-485 serial port with network access.

    155 Mbit/s ATM-SONET OC-3c 1300 nm fiber optic network interface with AAL5 data protocol
    Flexible virtual channel (VC) organization (one D/A channel per VC or multiple D/As per VC)
    Up to 450 Ksamples/sec per channel. 16-bit D/A resolution. 120 dB dynamic range
    General purpose RS-232/RS-485 serial port on VME P2 with ATM network access
    Configurable number of active channels (1-32)
    Timing port for synchronizing multiple cards or slaving sample rate to an external source
    Differential analog outputs for low crosstalk and noise pick-up
    Compatible with PSI Analog-to-ATM A/D cards
    Zero-Programming’ requires no VME OS, VME processor, drivers, or code

    155 Mbit/s ATM-SONET OC-3c 1300 nm fiber optic network interface with AAL5 data protocol
    Flexible virtual channel (VC) organization (one D/A channel per VC or multiple D/As per VC)
    Up to 100 Ksamples/sec per channel. 24-bit D/A resolution. 120 dB dynamic range
    General purpose RS-232/RS-485 serial port on VME P2 with ATM network access
    Configurable number of active channels (1-64)
    Configurable gain (6, 24, or 36 dB)
    Timing port for synchronizing multiple cards or slaving sample rate to an external source
    Differential analog outputs for low crosstalk and noise pick-up
    Compatible with PSI Analog-to-ATM A/D cards and SAKI-ATM nodes
    Zero-Programming’ requires no VME OS, VME processor, drivers, or code